Sol-Care™ Safety IV Catheter Closed System is single use indwelling device consists of medical plastics, stainless steel needle, wings and extension sets. The device can be single port and dual port with needle free port. It is used to insert into the human peripheral vascular system for
clinical infusion.
The device features passive safety mechanism that offers protection from needle stick injury after the needle is withdrawn from the patient.

Intended use: The device is intended for short term use in the peripheral vascular and subcutaneous system and provides access for the administration of intravenous fluids, medication, blood derivates or the withdrawal of blood samples. Closed peripheral venous catheter can stay inserted as long as clinically indicated for short term therapy but the only if there is no any sign of phlebitis or catheter occlusion or any signs of complications. This catheter may be used for any patient population with consideration given to adequacy of vascular anatomy and appropriateness of procedure.

Intended user: Licensed healthcare professionals (HCP).

Cautions:
• Consult instruction for use before using this device
• Users must be trained by a healthcare professional and follow the Instructions For Use.
Failure to follow these instructions could result in serious injury to the patient and/or clinician.
• Sharp object. Risk of sharp injuries.
• Do not use if the unit package is damaged or opened.
• Device for single use only: do not sterilize and/or use again, in order not to compromise its performances or cause possible cross contamination by other patients.

CE0197

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Fujian Bestway Medical Polymer
Corporation, Room 02, 17th Floor, West District of Jinyuan Grand Plaza, No. 68 Guangda Road,
Taijiang District, Fuzhou, 350005 Fujian P.R.China

Sol-Care Safety IV Catheters are developed to provide a vascular access to patients and at the same time reduce the risk of needle stick injuries. They are single-use indwelling device consisting of medical plastics, stainless steel needle and passive safety needle tip protection. They are offered witha soft polyurethane material, clear flashback chamber, anti-slips ribs and tab that helps on the catheter insertion and advancement with no technique change required by the user. For the quick addition of drugs, there is a port that can be opened and closed per access need. They are also color-code for easier catheter gauge identification, They are intended to be inserted into a patient’s peripheral vascular system for short term use of blood sampling or fluids administration.

They are compatible with ISO luers. Our products are Latex free, DEHP Free, non-toxic, non-pyrogenic and latex free.

Indications: IV access to peripheral vascular system indicated for short term use to sample blood or administer fluid.

Intended user: Healthcare professional.

Cautions:

• Consult instruction for use before using this device .

• Users must be trained by a healthcare professional and follow the Instructions For Use. Failure to follow these instructions could result in serious injury to the patient and/or clinician.

• Sharp object. Risk of sharp injuries.

• Do not use if the unit package is damaged or opened..

• Device for single use only: do not sterilize and/or use again, in order not to compromise its performances or cause possible cross contamination by other patients.

CE 0197

Sol-Care Safety IV Catheters are developed to provide a vascular access to patients and at the same time reduce the risk of needle stick injuries. They are single-use indwelling device consisting of medical plastics, stainless steel needle and passive safety needle tip protection. Available in two versions: straight with and without wings. Both versions are offered with soft polyurethane material, clear flashback chamber, anti-slips ribs and tab that helps on the catheter insertion and advancement with no technique change required by the user. They are designed to stand high pressure injection, up to 300psi. They are also color-code for easier catheter gauge identification, They are intended to be inserted into a patient’s peripheral vascular system for short term use of blood sampling or fluids administration.

They are compatible with ISO luers. Our products are Latex free, DEHP Free, non-toxic, non-pyrogenic and latex free.

Disposable IV Catheter is suitable for use with power injectors set to a maximum pressure of 300 psi and within maximum flow rate recommendations (see table), when the Vent fitting is removed, and a direct connection is made.

Indications: IV access to peripheral vascular system indicated for short term use to sample blood or administer fluid.

Intended user: Healthcare professional.

Cautions:

• Consult instruction for use before using this device .

• Users must be trained by a healthcare professional and follow the Instructions For Use. Failure to follow these instructions could result in serious injury to the patient and/or clinician.

• Sharp object. Risk of sharp injuries.

• Do not use if the unit package is damaged or opened..

• Device for single use only: do not sterilize and/or use again, in order not to compromise its performances or cause possible cross contamination by other patients.

CE 0197

Sol-Care Safety IV Catheters are developed to provide a vascular access to patients and at the same time reduce the risk of needle stick injuries and blood exposure. They are single-use indwelling device consisting of medical plastics, stainless steel needle and passive safety needle tip protection. The notch presented in the needle enables a quick blood return visualization. Available in straight with wings version. They are offered in soft polyurethane material, clear flashback chamber, anti-slips ribs and tab that helps on the catheter insertion and advancement with no technique change required by the user. They are dsigned to stand high pressure injection, up to 300psi. They are also color-code for easier catheter gauge identification, It is intended to be inserted into a patient’s peripheral vascular system for short term use of blood sampling or fluids administration. Their blood control feature, will prevent blood exposure immediately upon needle removal reducing the risk of bloodborne pathogens contamination.

They are compatible with ISO luers. Our products are Latex free, DEHP Free, non-toxic, non-pyrogenic and latex free.

Disposable IV Catheter is suitable for use with power injectors set to a maximum pressure of 300 psi and within maximum flow rate recommendations (see table), when the Vent fitting is removed, and a direct connection is made.

Indications: IV access to peripheral vascular system indicated for short term use to sample blood or administer fluid.

Intended user: Healthcare professional.

Cautions:

• Consult instruction for use before using this device .

• Users must be trained by a healthcare professional and follow the Instructions For Use. Failure to follow these instructions could result in serious injury to the patient and/or clinician.

• Sharp object. Risk of sharp injuries.

• Do not use if the unit package is damaged or opened..

• Device for single use only: do not sterilize and/or use again, in order not to compromise its performances or cause possible cross contamination by other patients.

CE 0197

Sol-Care Prefilled Flush Syringes are developed to facilitate the flush procedures as they are ready-for-use which saves healthcare professionals time for preparation. Our unique labelling design provides all necessary information to facilitate easy identification and to help prevent the risk of medication errors. They are compatible with standard luers (ISO standard compliant)* and needle free connectors avoiding needlestick injuries. With its internal sterile fluid path, it is suitable for most of IV procedures that aim to keep the catheter patency. Our 3ml and 5ml products are presented with 10ml diameter barrel which enables a safe and low pressure when flushing the catheters. The stopper is designed in way to reduce blood reflux when in use. Our syringes plunger, flange, tip protection are designed for facilitate handling. Our products are Latex free, DEHP Free, PVC Free, BPA Free, PHT Free.

*EN ISO 80369-1:2018 - Small-bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements

EN ISO 80369-7:2021 - Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications

EN ISO 80369-20:2015 - Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods

Indications: For flushing the catheters between intermittent infusions.

Intended user: Trained doctors or nurses.

Cautions:

1. The use of the product must meet the requirements of relevant operational specifications and relevant regulations of medical department and be restricted to trained doctors or nurses.

2. Check for package integrity. It is strictly prohibited to use if product package is damaged, or the syringe breaks, leaks, disintegrates.

3. It is strictly prohibited to use if protective tip cap is not installed correctly, loose or falls off.

4. Visual examination for clarity of solution, if solution discoloration, turbidity, precipitation or any form of suspended particulate matter material appears - DO NOT USE.

5. DO NOT RE-STERILIZE.

6. Please use the product within the validity period. The product batch number, production date and expiration date are shown on the product packaging label.

7. It is strictly prohibited to re-use. Single use only, and discard any unused remaining solution.

8. Check the compatibility of 0.9% sodium chloride solution with drugs. Direct contact with drugs incompatible with 0.9% sodium chloride injection is strictly prohibited.

9. It is strictly prohibited to be used for subcutaneous and intramuscular injection and dispensing. Only for flushing of intra-vascular catheters. It is not for medication dilutions, nor for dry product reconstitution.

10. DO NOT PLACE THE PRODUCT ON A STERILE FIELD.

11. Do not use if you are allergic to the sodium chloride solution.

CE 0123

The Sol-M Blunt Fill Needle with Filter is designed to reduce the risk of needlestick injuries to healthcare workers when preparing medication by removing the need for sharps. The 5-micorn filter is designed to restrain drawing of shattered particles when using ampoules.

For use when drawing medication and can also be used for addig medication in needless IV systems.
Features:
• Eliminates the unnecessary use of sharps
• Color-coded hubs for easy identification
• Needle hub is compatible with all Luer Lock and Luer Slip Tip syringes
• 5-micron filter is included to prevent the drawing of glass particles when using ampules
• Not manufactured with Latex, PVC and DEHP

Intended use: Sol-M™ Blunt Fill Needle is used in conjunction with a syringe as an
additive device for aspiration from multi-dose medicine vials or injection into I.V. Systems and pre-slit septum covering injection sites.

Intended user: Licensed healthcare professionals (HCP).

Cautions:
• Single use device. Re-use or use if the package is damaged may lead to infection or other illness/ injury.
• Sharp object. Risk of sharp injuries.

Note: In case particle are visible in the vial or ampoule it is recommended to discard the medication to prevent injections of those particles in the patient.

CE 2797

Intended for spinal puncture and injection of liquid drugs into the subarachnoid space, the Sol-M® NRFit® spinal needles, with back-cut, adopt the ISO 80369-6, NRFit®, connector to help preventing potentially fatal misconnection risks.

The introducer needle allows for easy skin penetration and provides additional support to the spinal needle.

Sol-M® NRFit® Spinal Needles’ clear hub and rapid reflux enables anaesthesiologists to visualize CSF for proper needle placement.

Sol-M® NRFit® Spinal Needles are available in different sizes with lengths ranging from 38 mm to 120 mm and gauges from 18 G to 27 G.

• Sharp bevel designed for low puncture force to help minimise tissue coring

• High-quality stainless-steel needle for increased stability

• Stylet clip provide identification of needle tip point orientation and reduce the risk of needle stylet falling out

• Needle tip orientation indicator for identification of needle tip point orientation.

• Clear needle hub for easy visualization of blood or CSF and detection of CSF flashback

• Ergonomic needle hub design for an individual and safe handing position, better control of needle

• Fitted stylet to reduce the risk of tissue coring

• Colour-coded Needle Hub: easy to identify Needle Gauge

Intended use: Spinal puncture and injection of liquid drugs into the subarachnoid space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

• Do not use if the package is opened or damaged.

• Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

NRFit® is a registered mark of GEDSA. NRFit® educational material used with permission of GEDSA, www.stayconnected.org

Intended for epidural puncture, and injection of liquid drugs into the epidural space, the Sol-M® NRFit® Epidural needle with fixed wings adopts the ISO 80369-6, NRFit®, connector to help preventing potentially fatal misconnection risks.

Sol-M® NRFit® Epidural Needles with Fixed Wings provide an ergonomic grip for anaesthesiologists, enabling more control over needle insertion and depth. The needle tube has calibrated

needle-depth markings to illustrate depth. Sol-M® Epidural Needles with Fixed Wings are available in a series of combination of needle size and length.

• High-quality stainless-steel epidural needle

• Fitted color-coded plastic stylet

• Fixed wings that give extra stability

• Ergonomic needle hub for better control of needle

Intended use: Epidural puncture and injection of liquid drugs into the epidural space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

• Do not use if the package is opened or damaged.

• Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

NRFit® is a registered mark of GEDSA. NRFit® educational material used with permission of GEDSA, www.stayconnected.org

Intended for contemporary spinal and epidural puncture for spinal anesthesia followed by injection of liquid drugs into the epidural space each mini-kit includes a coordinated range of spinal and epidural needles, and epidural catheter, LOR syringe and antibacterial filters fitted with the ISO 80369-6, NRFit®, connector to reduce the risks of misconnections in regional anaesthesia.

Each mini-kit includes:

• NRFit® Epidural needle,

• NRFit® Spinal needle (AN-S II = pencil point),

• NRFit® Epidural catheter + Catheter introducer guide,

• NRFit® Catheter connector,

• NRFit® LOR Syringe 10ml,

• NRFit® Liquid filter 0.22μm,

• Epidural Caution Label

Sol-M® NRFit® Spinal Needles’ clear hubs enable anaesthesiologists to visualize CSF for proper needle placement.

Sol-M® NRFit® Epidural Needles with Fixed Wings provide an ergonomic grip for anaesthesiologists, enabling more control over needle insertion and depth. The needle tube has calibrated needle-depth markings to illustrate depth.

Sol-M® NRFit® Epidural Catheter provides the precise balance of characteristics needed to get ease of placement, reliable patency, and optimum indwelling characteristics. Now this technology is available in a close-end, multiport, standard and wire reinforced catheter.

• High-quality stainless-steel needle for increased stability

• Spinal needle’s stylet clip provide identification of needle tip point orientation and reduce the risk of needle stylet falling out

• Spinal needle’s tip orientation indicator for identification of needle tip point orientation.

• Fitted color-coded plastic stylet

• Epidural needle’s fixed wings that give extra stability

• Ergonomic needle hub for better control of needle

• Loss-of-resistance syringe for the identification of the epidural space

• Epidural catheter available with soft and reinforced tip configurations

• Liquid filter 0.22 micron for bacterial contamination prevention

Intended use: Spinal and epidural puncture, and injection of liquid drugs into the epidural space and the subarachnoid space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

·       Never pull back the catheter through the epidural needle.

·       Do not use if the package is opened or damaged.

·       Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

NRFit® is a registered mark of GEDSA. NRFit® educational material used with permission of GEDSA, www.stayconnected.org

Sol-M® Spinal Needles’ clear hubs enable anaesthesiologists to visualize CSF reflux for proper needle placement.

The spinal anesthesia needle has a tightly fitting removable stylet that completely occludes the lumen to avoid block. The stylet is withdrawn after the spinal anesthesia needle has penetrated into the subarachnoid space for injecting anesthetic.

Sol-M® Spinal needle, with Back-cut point, are available in a series combination of needle size and length. The Sol-M™ Spinal Needle are available in different sizes with lengths ranging from 38 mm to 120 mm and gauges from 18 G to 27 G.

• Sharp Back-cut Point designed for low puncture force

• High-quality stainless-steel needle for increased stability

• Stylet clip provide identification of needle tip point orientation and reduce the risk of needle stylet falling out

• Needle tip orientation indicator for identification of needle tip point orientation

• Clear needle hub for easy visualization of blood or CSF and detection of CSF flashback

• Ergonomic needle hub design for an individual and safe handing position, better control of needle

• Fitted Stylet to reduce the risk of tissue coring

• Traditional Luer Lock female connection for compatibility with a wide range of devices, such has Luer and Luer Lock syringes

• Colour-coded Needle Hub: easy to identify Needle Gauge

Intended use: Spinal puncture and injection of liquid drugs into the subarachnoid space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

• Do not use if the package is opened or damaged.

• Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

Intended for epidural puncture, and injection of liquid drugs into the epidural space.

Sol-M® Epidural Needles with Fixed Wings provide an ergonomic grip for anaesthesiologists, enabling more control over needle insertion and depth. The needle tube has calibrated

needle-depth markings to illustrate depth.

Sol-M™ Epidural Needles with Fixed Wings are available in a series of combination of needle size and length.

• High-quality stainless-steel epidural needle

• Fitted color-coded plastic stylet

• Fixed wings that give extra stability

• Ergonomic needle hub for better control of needle

• Traditional Luer Lock female connection for compatibility with a wide range of devices, such has Luer and Luer Lock syringes

Intended use: Epidural puncture and injection of liquid drugs into the epidural space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

• Do not use if the package is opened or damaged.

• Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

Intended for spinal puncture and injection of liquid drugs into the subarachnoid space, the Sol-M® NRFit® spinal needles, with back-cut, adopt the ISO 80369-6, NRFit®, connector to help preventing potentially fatal misconnection risks.

Sol-M® NRFit® Spinal Needles’ clear hub and rapid reflux enables anaesthesiologists to visualize CSF for proper needle placement.

Sol-M® NRFit® Spinal Needles are available in different sizes with lengths ranging from 38 mm to 120 mm and gauges from 18 G to 27 G.

• Sharp bevel designed for low puncture force to help minimise tissue coring

• High-quality stainless-steel needle for increased stability

• Stylet clip provide identification of needle tip point orientation and reduce the risk of needle stylet falling out

• Needle tip orientation indicator for identification of needle tip point orientation.

• Clear needle hub for easy visualization of blood or CSF and detection of CSF flashback

• Ergonomic needle hub design for an individual and safe handing position, better control of needle

• Fitted stylet to reduce the risk of tissue coring

• Colour-coded Needle Hub: easy to identify Needle Gauge

Intended use: Spinal puncture and injection of liquid drugs into the subarachnoid space.

Intended user: Professionally qualified anesthesiologist.

Cautions:

• Do not use if the package is opened or damaged.

• Read the instruction for use before using this product.

CE 0123

Distributed by Sol-Millennium Europe Sp. z o.o. Manufactured by Zhejiang Runqiang Medical Instruments Co., Ltd 599 Ruifeng, Street, Gaozhao District, Xiuzhou District, 314031 Jiaxing City.

NRFit® is a registered mark of GEDSA. NRFit® educational material used with permission of GEDSA, www.stayconnected.org