The Sol-Care® Safety Shield Blood Collection Tube Holder is used in the blood collection procedure. The disposable product is ready to use with Sol-M® Multi-sample needles. The safety guard is an integral part of the holder, and can be adjusted according to the user's preference.

• Convenient one-handed activation

• Does not require changes to the blood collection procedure

• The needle shield rotates around the collar and its position can be adjusted according to the user preference

• Helps to prevent needlestick injuries

• Compatible with all sizes of Sol-M® Multi-sample needles

The Sol-Care® Safety Shield Blood Collection Tube Holder is a non-sterile single use plastic tube holder with a pre-attached pivoting shielding arm. It is used in conjunction with multi-sample needle in routine blood sampling procedures. The used needle can be fully covered into the shielding arm after use to avoid needlestick injuries. The safety mechanism is irreversible, once activated. It is an integral part of the device. Its orientation can be adjusted according to the user's preference.

Intended use: The Sol-Care® Safety Shield Blood Collection Tube Holder intended to be used with standard muti-sample needle providing safety pivot shield that shall be activated by the end user to cover the needle after use.

Intended user: Licensed healthcare professionals (HCP).

Cautions:

• It is the single use device only and shall be disposed of with the used needle immediately after use. Re-use may lead to infection or other illness/injury.

• This device is not compatible with BD flashback needle.

CE

Intended purpose/use:
Sol-Care™ Safety Blood Collection Needle is used for short-term infusion of intravenous fluids or blood collection (when used with the Holder with Male Luer Adapter accessory).

Indications for use:
·Sol-Care Safety Blood Collection Needle with end luer cap/ SOL-CARE Safety Winged Infusion Set is a sterile, multiple-sample, single-use winged blood collection needle indicated for short-term infusion of intravenous fluids and venipuncture to obtain blood specimens from patients when used with the Holder and Male Luer Adapter accessory. The device is designed with an integral safety sliding shield that provides a safety feature intended to cover the intravenous (IV) end of the needle after the needle is withdrawn from the patient and aids in the prevention of needle stick injury.

Cautions:
Do not use the device within the Magnetic Resonance (MR) environment.
Single use device.
Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object. Risk of sharps injuries.

CE 2797

Sol-Care™ Safety Blood Collection Tube Holder Set is a high-quality and high-tech blood collection device, designed to provide a safe and reliable method for facilitating blood withdrawal from a patient into evacuated blood collection tubes without exposing the healthcare worker to an accidental needle stick injury.

Intended users: Licensed healthcare professionals (HCP).

Cautions:
Non-sterile.
This holder is for single use only.
For use with conventional multisample blood collection needles.
Not for use with winged needle sets or luer adapters.

CE

Sol-Guard™ Safety Pull-Button Blood Collection Set and Sol-Guard™ Safety Pull-Button Blood Collection Set  with Pre-attached Holder promotes single-handed in-vein safety activation to instantly retract the needle after use, helping prevent needlestick injury and bloodborne pathogen exposure.
This device features an exclusive version of the “Butterfly Needle”, designed with a sliding button that, using pull force, activates in-vein needle retraction after use.
Its design was awarded the reddot design, the Good Design and the IF design awards in 2022.

Features:

• Low angle tri-bevel tip designed to improve penetration, thus helping reducing patient discomfort

• Thin-wall needle for fast flow rate and to aid reducing the risk of blood hemolysis

• Tactile non-slip grip to help engage the safety feature

• 30% wider wings for improved handling during insertion and removal*

• Large oversized arrow to easily identify the activation pull button

• Flashback for instant and clear confirmation of proper needle placement

• Spring mechanism for split second in-vein needle retraction

Intended use:
Sol-Guard™ Safety Pull-Button Blood Collection Set with Luer Adapter and Sol-Guard™ Safety Pull-Button Blood Collection Set  with Pre-attached Holder is a sterile, multi-sample, single-use fixed winged blood collection set intended for venipuncture to obtain blood specimens from patients. The device is designed with spring retractable needle technology that allows in vein needle retraction after use to prevent needlestick injury and blood exposure.

Intended user: Licensed healthcare professionals (HCP).

Cautions:

• This device is sterile unless the package has been damaged or opened.

• Do not use the device if the package is opened or damaged.

• This device is single use only. Do not reuse.

• Make sure your hands and gloves are dry before activating safety pull button.

• Sharp object. Risk of sharp injuries.

CE 2797

*Wing size increased to 43 mm vs 33 mm in previous models. Internal data.

Intended use - The Luer Adapter is noninvasive device used to connect venous access devices including blood collection sets, winged infusion sets to blood collection tubes. and non-needle devices for collection of blood specimens.

Intended users - Licensed healthcare professionals (HCP).

Cautions:
Single use device.
Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object.
Risk of sharps injuries.

CE 2797

Intended use: To be used with blood collection needles, tubes or bottles as a system in routine venipuncture procedures.

Intended users: Licensed healthcare professionals (HCP).

Cautions:

Non-sterile.

This holder is for single use only. Use once and discard.

Any holders that becomes contaminated with blood is considered hazardous and must be disposed of immediately.

CE

Intended use: Indicated for venipuncture, for exams, blood transfusion and hemorrhage interruption.
Intended users: Licensed healthcare professionals (HCP).
Cautions:
Non-sterile.
single use device
CE

Intended use: To be used with blood collection needles, tubes or bottles as a system in routine venipuncture procedures.
Intended users: Licensed healthcare professionals (HCP).
Cautions:
Non-sterile.
This holder is for single use only. Use once and discard.
Any holders that becomes contaminated with blood is considered hazardous and must be disposed of immediately.

CE

Intended use: intended to transfer blood specimen to a blood collection tube or blood culture bottle.
Intended users: Licensed healthcare professionals (HCP).

Cautions:
Single use device. Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object. Risk of sharps injuries.

CE 2797

Intended use: used to connect venous access devices including blood collection sets, winged infusion sets to blood collection tubes and non-needle devices for collection of blood specimens.
Intended users: Licensed healthcare professionals (HCP).
Cautions:
Single use device. Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object. Risk of sharps injuries.

CE 2797

Intended use:
Safety Blood Collection Needle with Pre-attached holder is used for blood collection (when used with the Holder with Male Luer Adapter accessory).

Indications for use:
Sol-Care Safety Blood Collection Needle with Pre-attached holder is a sterile, multiple-sample, single-use winged blood collection needle indicated for venipuncture to obtain blood specimens from patients. The device is designed with an integral safety sliding shield that provides a safety feature intended to cover the intravenous (IV) end of the needle after the needle is withdrawn from the patient and aids in the prevention of needle stick injury.
Intended users: Licensed healthcare professionals (HCP).
Cautions:
Do not use the device within the Magnetic Resonance (MR) Environment.
Single use device. Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object. Risk of sharps injuries

CE 2797

The Sol-Care™ Safety Multi-Sample Blood Collection Needle with Pre-attached tube holder is a device intended to be used in routine venipuncture procedures. In the activated position, the safety shield protects against accidental needle stick injury and blood exposure during normal handling and disposal.

Intended use: used with tube holder as a system in routine venipuncture procedure. In the activated position, the safety shield protects against accidental needle stick injury during normal handling and disposal.

Intended users: Licensed healthcare professionals (HCP).

Cautions:
Do not forcefully de-activate or re-activate the safety mechanism after it has been activated.
Single use device. Re-use or use if the package is damaged may lead to infection or other illness/ injury.
Sharps object. Risk of sharps injuries.

CE 2797